Electrical Specifications C35 C40 C60
Voltage Configurations 12 and 24 VDC 12, 24 and 48 VDC 12 and 24 VDC
Maximum PV Open Circuit Array Voltage 55 VDC 125 VDC 55 VDC
Charging / Load Current (@ 25 °C) 35 amps DC 40 amps DC 60 amps DC
Maximum Peak Current 85 amps 85 amps 85 amps
Maximum Voltage Drop Through Controller 0.30 volts 0.30 volts 0.30 volts
Typical Operating Consumption 15 ma 15 ma 15 ma
Typical Idle Consumption 3 ma 3 ma 3 ma
Recommended Breaker Size 45 amps 50 amps 60 amps rated at 100% continuous duty
Recommended Wire Size #8 AWG #8 AWG #6 AWG at 90°
Lead Acid Battery Settings Adjustable Adjustable Adjustable
NiCad Battery Settings Adjustable Adjustable Adjustable Load Control Mode
Low Voltage Reconnect Adjustable (sticker provided with unit) Adjustable (sticker provided with unit) Adjustable (sticker provided with unit)
Low Voltage Disconnect User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a one time, user selected grace period
A Controller for Virtually Any DC Charging Source
The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60.
All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
Trace Controllers
C-35,40-60
C-12
C-12 12 Amp 3 stage Solar Charge, DC Load and Auto Lighting Controller.
The C12 has a LED status light displaying both charging functions and battery charge state at a glance. This controller is used worldwide in a variety of applications, including remote village lighting systems and automatic outdoor lighting in Africa, Latin America, and Asia. The DC disconnect function of the C12 will disconnect DC loads if batteries reach low-voltage conditions. A simple one-time reconnect turns power back on for ten minutes. An optional temperature sensor for the C12, ensures precise battery charging regardless of battery temperature fluctuations.
C-40
C-60
Price
C-35
35A
12/24 V
$ 115.90
40A
12/24/48 V
154.45
60A
192.65
12/24/48 V
Price $ 110.40
Wind Generators
Solar Kits
Efficient
Appliances
(Shown with LVD digita display)
CM, CMR/50 or CMR/100-A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors.
50 ft. (15 m) or 100 ft. (30 m) cable included.
Optional Features:
LCD Digital Display
DVM/C40 Mounts on front of C-35,40 and 60 controllers P/N 33711
Price
$
89.75
C40R/50 Remote mounting for digital meter(same as DVMC40 with 50' connector) P/N 33713
114.20
C40R/100 Same as C40R/50 with a 100' cord P/N 33715
134.00
BTS/15 or BTS/35—Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. For C-12 & C-40 Controllers.
Temperature Compensation
BTS/15 sensor with 15' cord P/N 53037
BTS/35 sensor with 35' cord P/N 53063
$
29.00
32.00
