Xantrex Inverter accessories

DAI Stacking interface for 2 DA inverters, providing 120/240 VAC, 3 wire 240 VAC-
(doubles output) includes two 1.5' battery cables and the stacking comm. cable
(not for use with E models)

DACB Conduit box for all DA's -fits either end -AC/DC (1/2", 3/4" and 2" knockouts), adds 6"

GSM Gen Start Module -allows auto generator start with the PS Series inverter

ALM Aux Load Module -provides voltage controlled relays with the PS Series

SWCA Sine wave communications adapter allows PC connection and monitoring of up to eight SW

or PS Series inverters -includes adapter, DOS based software, 50' of cable and DB9 connector

SWRC Full function remote control with LCD display for all SW and PS Series inverters with 25' cable

SWRC/50ft Full function remote control with LCD display for all SW and PS Series inverters with 50
' cable
SWI/PAR Sine wave paralleling kit- connects 2 identical SW & PS inverters together for twice the
output power at the same voltage (North America only)

SWI/PAR/E E version inverters sine wave paralleling kit 152ACCSWI/PAR-E

SWI Series stacking interface for 2 identical SW and PS inverters, provides 120/240 VAG,
3 wire 240 VAC, Doubles output (not for use with E models)

SWCB Conduit box for SW Series -fits on the DC end of the inverter (1/2", 3/4" and 2" knockouts)
adds 6"
PSCB Conduit box for PS Series -fits on the DC end of the inverter

The DC rated circuit breaker/disconnect with indoor enclosure ensures your installation's compliance with NEC and other safety standard requirements. Designed to work specifically with SW, PS and DR Series inverters and most solar charge controllers for residential and commercial applications. Optional second inverter breaker, grounding/bonding block and circuit breaker allow field customization. ETL listed.

DC250 250 amp breaker with enclosure -for SW4024, SW5548, PS2212, 152ACCDC250
PS2512, DR3624, DR2412
DC175 175 amp breaker with enclosure for SW4048, PS 2524, DR1512, DR1524, DR2424 152ACCDC175
GJ250 Additional 250 amp breaker (field installable) for a second, stacked or 152ACCGJ250BRKR
unstacked SW or DR inverter
GJ175 Additional 175 amp breaker (field installable) for a second, stacked or 152ACCGJ175BRKR
unstacked SW or DR inverter
DCBB Negative/ground bonding block -connects up to two #4/0 AWG negative 152ACCDCBB
cables and ground system cables
CD60DC 60 amp circuit breaker for solar array input disconnect for C40 -152ACCPPOCD60
mounts on side of DC250/175
CD15 15 amp circuit breaker for small DC load -mounts on side knockout of 152ACCCD15
DC disconnect enclosure
CD20 20 amp circuit breaker for small DC load -mounts on side knockout of 152ACCCD20
DC disconnect enclosure