Alphasolar: AC kilowatt hour meters, DC meters and shunts
Meters
The TM500A provides easy to understand information such as produced and used DC current. It keeps track of the energy your system has available and energy consumed to ensure adequate reserve power capacity and longevity of your battery bank.
The Trimetric battery monitor meter can be used in 12,24 or 48 volt battery systems. reads volts, amps and amp-hours on an LED display. Amp-hours.Also features a "battery “% full” display . An LED lights when the battery is charging and flashes when the battery has been fully charged. Another LED flashes when batteries should be recharged, equalized, and during low battery voltage. It also records minimum and maximum voltage, days since batteries were last charged, days since equalized, and total lifetime amp-hours dis-charged from the batteries.
Tri-Metric 2020 Battery Monitor Amp-Hour Meter
TM-2020 12-48 volt Dim. 4.75"x 4.50"x1.75" Price
Accessories:
48 Volt Adapter
29.75
Wire mold box for flush mounting
11.95
187.50
$
Xantrex Link 10 & 20 meter
TM 500 with shunt and 50' communication cable 12/24 volt Price
(Dim. 4.5"x 4.5"x1.725" weight 3 lbs.)
$
237.80
TM 500 without shunt
includes communication cable and plug for shunt
194.90
TM 48 adapter (For adapting TM 500 to 48 vdc)
40.00
Shunts for use with all DC meters:
Prescaler 0-500 volts for link 10
35.65
100 Amp shunt,50 mv
29.40
The Trace TM-500 Meter is easy to use and install and comes with 50' (15 m) of cable, a Deltek 50 mV/500 amp shunt, a prewired cable, and a plug-in adapter board
TM 500 dimensions 3.88" x 5.377"x 1.25" 2 year warranty
Sunwize AC kilowatt hour meter 6" diameter 4.5 lbs.
This standard utility grade meter, certified and calibrated, is useful in
PV- grid tied or strand, alone systems for monitoring the solar energy
production from sine-wave DC-AC inverters.
Rated for indoor//outdoor use for 120/240 V 60HZ single-phase operation.
Numeric display in kilowatt-hrs enables simple aluminum with 1" threaded
conduct hubs & GND lug. Meter seal is used to determine unauthorized entry.
Sunwize AC watt hour meter
Meter socket 6" diameter 1.5 lbs.
Meter seal
$ 39.00
29.00
1.20
Link 10 and Link 20 use sophisticated microprocessor technology to provide complete battery status information for one and two battery banks, respectively. Simple and easy-to-use multicolor displays show volts, amps, amp hours consumed, and operating time remaining. The Link 10 and 20 allow you to select Automatic, Sleep and Scanning modes and automatically calculate and display charging efficiency. The Link 20 can monitor a house bank and starting bank or two house bank batteries at the same time. By adding an optional prescaler, Link 10 can monitor single battery banks up to 500 volts.
Product Features
Digital Numeric Display - LED display shows numeric read out of volts, amps, amp-hours and time remaining
Easy to read multi-color LED bar graph
Splash proof panels allow for outdoor mounting and hands free operation
Displays key historical battery information such as charge efficiency, deepest discharge, and
average discharge Compatible with 12 and 24 volt DC systems
Works with any battery type
Includes DC shunt (part#84-2010-00 for Link 10 and 84-2011-00 for Link 20)
Low battery alarm contacts One year warranty
Accessories
Color-coded, twisted pair cable (eases installation). Available in 25 or 50 foot lengths .
Prescalers (0-100 or 0-500 volts) to extend voltage range covered by your meter
Xantrex Engineering TM 500 meter
Wind Generators
Complete Power
Ready Systems
Lights
Small Solar Kits
module mounts
Solar controllers
Batteries
Efficient Appliances
500 Amp shunt,50 mv
107.35
84-2015-01 Link 10 standard with 500 amp shunt
$205.47
Prescaler 0-100 volts for link 10
47.90
