Flowlight Booster pumps are designed to provide 3 to 4.5 gpm (10 1pm) at pressures as high as 65 PSI (4.5 kg/sq. cm) from shallow water sources; making them a low cost alternative to elevated tank installations. Flowlight Booster pumps feature positive displacement, rotary vane mechanisms made of forged brass, carbon graphite and stainless steel driven by a permanent magnet ball bearing DC motor. These units will survive most freezes, and are NSF approved for drinking water. These pumps use less than half the energy of conventional AC pumps and eliminate the high starting currents that stress inverters. Flowlight Booster pumps come with 3 feet of clear 3/4 inch flexible hosing and relief valve. Wearing parts are field replaceable with a typical cycle life of 5 to 10 years. An optional easy installation kit is available (See Booster Pump Accessories.) Overall life expectancy is 15 to 20 years. This series of pumps requires an in-line filter. One year warranty against defects in materials and workmanship.
2910-24 - 24V, 1/5 HP P/N 81236
Low speed model designed for suction lifts up to 20 feet at 3.4 gpm (12.91 1pm).
Same dimensions as above.

2920-12 - 12V, 1/4 HP P/N 81241
Standard speed model designed for suction lifts up to 10 feet at 4.5 gpm (17.0 1pm).
Same dimensions as above.

2920-24 - 24V, 1/4 HP P/N 81240
Standard speed model designed for suction lifts up to 10 feet at 4.5 gpm (17.0 1pm).
Same dimensions as above.
Dankoff Flowlight Booster Pump
Dankoff Flowlight Booster Pump
Price
$
518.33
519.71
537.89
536.17
622.83
684.57
Add to cart
Add to cart
Add to cart
Add to cart
Add to cart
Add to cart
1.5 cu.ft. / 18.25 lbs. (0.04 cu.m. /8.28 kg.)
2910-12-12V, 1/5 HP P/N 81239
Low speed model designed for suction lifts up to 20 feet a 3.4 gpm (12.91 1pm).
18.0 in. x 8.0 in. x 8.0 in. (45.72 cm x 20.3 cm x 20.3 cm)
2920-48- 48V, 1/2 HP P/N 81245
Standard speed model designed for suction lifts up to 10 feet at 4.5 gpm (17.0 1pm).
24.0 in. x 8.0 in. x 8.0 in. (60.96cm x 20.3 cm x 20.3 cm)
0.87 cu.ft. / 18.25 lbs. (0.03 cu.m. /8.28 kg.)
2920-115- 115 VAC, 1/4HP P/N 81242
Designed for 20 foot lifts at 3.4 gpm (12.91 1pm).
20.0 in. x 10.0 in. x 10.0 in. (50.8 cm x 25.4 cm x 25.4 cm)
1.14 cu.ft. /21.0 lbs. (0.035 cu.m. /9.52 kg.)
PRODUCTS
Solar Modules
Flexible thin film
Wattsun solar
trackers
Solarcharger load controllers
Inverters
Wind Generators
Air / Windseeker
Whisper
Expandable Sytem
Back-up Power Kit's
Complete Power
Ready Systems
Lights
Lighting/Accessories
Pumps
Small Solar Kits
RV,Boat
Educational
Computers
Flashlights
Efficient Appliances
Refrig/Freezers
System size worksheet
Home
Rigid Solar Modules
module mounts
Fixed module
mounts
Solar controllers
Inverters/Chargers
Grid-Tie Inverters
More stand-Alone
Power Systems
Solar Grid-Tie Kit's
Meters
Batteries
Batteries /Accessories
Staber Washer
Generators
About us
Links of interest
Order by mail
Order by Phone 772-464-0425
Back to Pumps
Solar pump controllers
Contact us