Alphasolar: Description for 960 watt solar kit

8 Kyocera KC-120 120 watt modules Kyocera has perfected the 15 cm square (approximately 5.91 in. square) multicrystalline solar cell, with conversion efficiency over 14%. The KC series solar modules incorporate EVA pottant with PVF backing laminated to tempered glass, assembled in an anodized and clear coated aluminum frame and equipped with a weatherproof junction box. Tempered glass surface is textured to help minimize reflective glare. All KC series modules are UL and cUL listed and CE certified. Each module carries a 25 year limited warranty Electrical Characteristics: Power (max) 120 Watts, Voltage (peak) 16.9 Volts, Current (peak) 7.10 Amps, Voltage (open circuit) 21.5 Volts, Current (short circuit) 7.45 Amps Physical Characteristics: Length 56.1 inches (1425 mm), Width 25.7 inches (652 mm), Thickness 2.0 inches (52 mm), Weight 26.3 lbs (11.9 kg)

2 UniRac-Universal Aluminum Ground Mount Structure UGR-104-ADJ Four Modules P/N 23315
Mounts four KC120 modules.
0.94 cu.ft. / 30.0 lbs. (0.03 cu.m. / 13.61 kg)
Universal, slotted aluminum rail design fits Uni-Solar, Kyocera and Power Value modules. will mount other modules as well. Fully field adjustable from 25º - 65º . Roof or wall mount bare aluminum members are engineered to withstand high wind loads. Module rails are of 1/8 inch formed 5052 aluminum (3.0 in. x 1.25 in.) and adjustable support legs of 2 inch extruded aluminum channel. Mounting feet are 2.5 in. x 2.5 in. x 0.187 in. Includes stainless steel hardware. All UniRac mounts are UPS shippable.

16 SURRETTE - S-460 DEEP CYCLE BATTERY P/N 40433
Deep cycle, flooded lead-antimony battery features a high cycle life and thick plates, and a large liquid reserve. This battery is heavier than its comparable model, (the L 16), and is unsurpassed in reliability and warranty. Model CH375 battery is a 6V, 438AH, with thick lead alloy flag terminals for 5/16 inch bolts (bolts not included) and packaged in a structural rib molded container with lifting rope handles. Drop ship orders are subject to freight allowances. Call for details. Seven year (first 24 months full; next 60 months pro-rated) warranty. Dry charged models for export are available
CH375- 6V, 438AH at C/100 12.75 in. x 7.12 in. x 16.75 in. (32.4 cm x 18.1 cmx 42.5 cm) 0.9 cu.ft. / 129.0 lbs. (0.026 cu.m. /58.6 kg)

1 SFE-16 Fiberglass battery enclosure P/N 26914
Fiberglass outdoor battery enclosures offer the best protection from the elements. Constructed of sturdy fiberglass reinforced polyester, acid-resistant resin combined with a smooth-white gel coat finish which provides for cooler interior temperatures as compared to metal or black plastic boxes. Supplied in two-halves, the removable deep lid offers unobstructed access to battery connections allowing easy installation and maintenance. Offered in three sizes ( 8, 16 or 24) for the following batteries: T-105, L16 or CH375 flooded lead acid batteries, or group 27 sealed batteries. Increased interior space allows for additional foam insulation. Supplied without holes.Outside dimensions: 59.0 x 38.5 in. x 22.0 in. ( 150.0 cm x 97.8 cm x 55.9 cm) Battery space: 51.5 in. x 31.25 in. (130.8 cm x 79.4 cm) 28.7 cu.ft. / 55.0 lbs. (0.8 cu.m. / 25.0 kg)

1 Xantrex/Trace C-40 Controller P/N 33710 & 33711 4.0 lbs.
The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard.
All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
Voltage Configurations 12 and 24 VDC 12, 24 and 48 VDC 12 and 24 VDC Maximum PV Open Circuit Array Voltage 55 VDC 125 VDC 55 VDC
Charging / Load Current (@ 25 °C) 35 amps DC 40 amps DC 60 amps DC Maximum Peak Current 85 amps 85 amps 85 amps
Maximum Voltage Drop Through Controller 0.30 volts 0.30 volts 0.30 volts Typical Operating Consumption 15 ma 15 ma 15 ma
Typical Idle Consumption 3 ma 3 ma 3 ma Lead Acid Battery Settings Adjustable Adjustable Adjustable
NiCad Battery Settings Adjustable Adjustable Adjustable Load Control Mode
Low Voltage Reconnect Adjustable (sticker provided with unit) Adjustable (sticker provided with unit) Adjustable (sticker provided with unit)
Low Voltage Disconnect User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a one time, user selected grace period
This controller comes with the optional LCD display with backlighting continuously displays battery voltage DC amperage, cumilative amphours and a separately resetable "trip" amphour measurement.

1 Xantrex/Trace PP-SW4024/S 4000 watt sine-wave inverter 24vdc input,120 amp battery charger,120 VAC @ 60 HZ P/N 50333 215 lbs.
SW Series sinewave AC power inverter with high efficiency and bi-directional operation, includes:

60 amp AC pass-thru power at 120 VAC (/S=Single System) or 120/240 VAC (/D=Dual System)
Adjustable three stage, temperature compensated battery charging 175 or 250 amp DC disconnect breaker*

60 amp AC disconnect/bypass breaker in box* AC and DC wiring in conduit (battery cables not included)*
Powder coated steel back-plate (40" H x 43" W x 1" D) Battery Temperature Sensor* Inverter Conduit Box*
Negative/Ground Bonding Block 500 amp/50 mV shunt (for remote metering)*These items are doubled on /D (Dual=two inverters) system