Liquid-tight conduit assemblies provide supplemental protection for individual wiring conductors
between adjacent PV modules. In high-voltage installations, they may be required to satisfy
the NEC. Standard assemblies include two #10AWG THHN conductors (rated 90°C, 600 volt),
red/black, contained within 1/2” flexible non-metallic conduit with gray PVC straight fittings and locknuts.
Module Interconnects – Liquid Tight Conduit Assemblies (LT)
AWG
MIC-LT #10-2 x 23”
MIC-LT #10-2 x 28”
MIC-LT #10-2 x 33”
MIC-LT #10-2 x 35”
MIC-LT #10-2 x 39”
Wind Generators
Complete Power
Ready Systems
Lights
Small Solar Kits
Efficient Appliances
module mounts
Solar controllers
Batteries
Solar module output cable
AWG-Conductors x Length
#10-2
# 8-2
# 6-2
Length
10 ft
20ft
30ft
50ft
$19.45
$18.40
$18.00
$19.00
$19.25
$25.00
$64.50
$82.00
$32.75
$87.50
$102.00
$45.50
$112.45
$136.00
$151.50
$194.00
Module Output Cables are used for connection from the solar array to the controller or PV
combiner assemblies. Cables are sunlight-resistant, PVC tray cable and direct burial with red/
black THHN conductors (rated 90° C, 600 volt). All are cut to length and outfitted with two strainrelief
cord connectors for 1/2” NPT, one end terminated for connection into PV junction box, #10
AWG with fork terminals, #8-6AWG with copper lugs.
